 |
|
Fig. 1 |
 |
|
Fig. 2 |
 |
|
Fig. 3 |
Fig. 1:
The exciter frequency of modern block producers lies in the range between 45 Hz and 70 Hz. The way the new VB mold system has been designed prevents any superimposition of natural frequency and exciter frequency and hence the danger of any resonance-induced fracturing is reduced considerably in this way.
Fig. 2:
Using the Finite Element Method (FEM), the VibroBox System was designed and constructed such that the web cross-section’s and the course of stressing characterize optimized oscillation behavior by the mold.
Fig. 3:
The damping realized by the mass (steel) in conventional molds is exceeded several times over by using polymer materials. This means less material wear and greater stability even in marginal areas.
